AERCT Series RegeneraTive Turbine Pumps
Updated 05/15/09
 |
 |
 |
 |
 |
 |
 |
 |
 |
Home - Back to AERCT • AERCS Series Regenerative Turbine Pumps - Back to AERCT Series Pump Information
Engineering Specifications
The contractor shall furnish (and install as shown on the plans) an AERCT Series horizontal close coupled regenerative turbine type pump model_________ size 1” by 1” of _________________ construction. Each pump shall have a capacity of ____GPM when operating at a total head of ____feet. Suction pressure will be ____feet with a liquid temperature of ____degrees F.
The pump is to be furnished with a mechanical seal with stainless steel metal parts, Viton elastomers, ceramic seat and carbon washer. A stainless steel shaft shall be furnished.
The pump casing shall be vertically split two piece, end suction and (TOP DISCHARGE.) (90° DISCHARGE.) (180° DISCHARGE.) (270° DISCHARGE.) The impeller shall be hydraulically self centering and no external adjustment shall be necessary.
The pump shall be close coupled to a D3 80mm NEMA “C” face ___HP ___phase ___Hertz ___voltage ___RPM horizontal _________________ motor. The motor shall be sized to prevent overloading at the highest head condition listed in this specification.
