AERCT Series RegeneraTive Turbine Pumps
Updated 05/15/09
 |
 |
 |
 |
 |
 |
 |
 |
 |
Home - Back to AERCT • AERCS Series Regenerative Turbine Pumps - Back to AERCS Series Pump Information
Engineering Specifications
The contractor shall furnish (and install as shown on the plans) an AERCS Series horizontal close coupled regenerative turbine type pump model_________ size 1” by 1 1/4” of _________________ construction. Each pump shall have a capacity of ____ GPM when operating at a total head of _______feet. Suction pressure will be ____feet with a liquid temperature of ____° F.
The pump is to be furnished with a mechanical seal with stainless steel metal parts, Viton elastomers, ceramic seat and carbon washer. A 316 stainless steel shaft in five horsepower pumps.
The pump casing shall be vertically split two piece, end suction and (TOP DISCHARGE) (90° DISCHARGE) (180° DISCHARGE) (270° DISCHARGE) with water passageways in each piece. The impeller shall be hydraulically self-centering and no external adjustment shall be necessary.
The pump shall be close-coupled to a ___HP ___Phase ___Hertz ___Volt ___RPM horizontal ____________________ motor. The motor shall be sized to prevent overloading at the highest head condition listed in the name specifications.
